Ice rink EPDM mat
|
Product name
|
Ice rink mat
|
Working life
|
Long life
|
|
Material
|
EPDM Rubber or
NBR+PVC or
Ice rink EPDM mat
|
Application
|
skating ice rink flooring hose
|
|
Size
|
with 8 hose
117*9*6mm
131*12*8mm
Ice rink EPDM mat with 6 hose
115*14*9mm
Ice rink EPDM mat with 4 tube
|
Color
|
Black :EPDM White:NBR+PVC
|
Mobile Ice Rink :
Ice rink concept
1. The absorption tower band (ice pad) is pushed out side by side to form an area that becomes the ice surface.
2. An environmentally friendly mixture of water and antifreeze is chilled to temperatures between -7°C and -10°C by a refrigeration unit and pumped into the ice pad.
3. the temperature of the ice pad is below freezing and then the spray liquid is frozen on the water to form a smooth and uniform ice surface.
4.The width of Ice-skating mat : width is 175 mm 10-tube composition
5.The length of Ice-skating mat : depends on ice rink
6. The weight of Ice-skating mat : depends on length
4.Temperature resistant :-40~+60 ℃
ice making equipment
In order to operate an artificial ice rink, a refrigeration unit and circulation pump are necessary. The refrigeration unit provides the necessary cooling energy which is then transferred to the antifreeze/water mixture. By means of a circulation pump, the mixture is chilled to -7°C and -10°C and then forced into the absorption area.
The advantage of greata ice rink mat
1. Because the epdm tube mat is flexible, it easily adapts to the ground. Obstacles such as fountains, trees, street light poles, etc. are not affected.
2. Because the total base point of the rink construction is low, less water is needed. Energy can be saved.
3. The narrow tube layout of the ice pad produces an energy transfer of 2 square meters per square meter of ice area.
4.This results in a cooling time consistent with a uniform ice surface.
5. Due to the tight separation of the tubes, energy efficient instant heat transfer to the rink surface has created greater value. So the end result is a rink system that is 39% more efficient than traditional heat transfer media, uses less refrigeration and glycol, and makes more money.
6. Due to the unique design of the Instant Rink, it takes less than 30% of the time to install and dismantle a traditional rink, in addition to the actual energy costs, labor is the most expensive.
7.The Instant Rink will only pay for itself in two quarters, which is achieved by reducing the consumption of materials and labor.
we can provide the free sample
Greata is a national high-tech enterprise specializing in the research and development, design, manufacture and sales of silicone rubber products. Founded in 2005, the company mainly produces epdm tube mats ,silicone rubber products and plastic products. There are more than 200 employees and the total factory production area is more than 20,000 square meters.
Quality System: ISO9001:2015 quality management system, ISO14001:2015 environmental management system and IATF16949:2016 quality management system certification. Product series Molded: silicone rubber sealing products/wire guard rings/plugs/foot pads/bushings/shaped miscellaneous parts/hardware coverings, etc. Liquid silicone: liquid silicone products and liquid silicone covered products (package hardware/hard plastic parts) Injection molding: soft plastic products, hard plastic products. Fixture: glass polishing fixture, laminating fixture, spraying fixture, pressure-holding fixture, etc. Extrusion: silicone / rubber / soft plastic hose, sealing strips, soft and hard co-extruded composite rubber strips. Calendering / die-cutting: new energy foam, various sponge gaskets, silicone / rubber foot pads, etc. Main applications: sealing, wrapping, protection, insulation, shock absorption, liquid drainage, etc. Product application fields: automotive, new energy, electronic appliances, communication, mechanical equipment, etc. Based on top quality, best service, reasonable price, high reputation.,our products selling very well to Europe,Australia,South America.Southeast Asia.
Q1. What is your terms of packing?
A: Generally, we pack our goods in n cartons. If you have legally registered patent, we can pack the goods in your branded boxes after getting your authorization letters.
Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We’ll show you the photos of the products and packages
before you pay the balance.
Q3. What is your terms of delivery?
A: FOB,EXW,DAP,DDP,CIF
Q4. How about your delivery time?
A: Generally, it will take 7 to 10 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.
Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds .
Q6. What is your sample policy?
A: We can supply the sample for free, but the customers have to pay the sample cost and the courier cost.
Q7. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery.
Q8: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them,
no matter where they come from.
